Best Marine LED Beacons -  Marine LED Beacons

Lantern Specification

Light source High intensity LEDs.(with secondary lens)
Light Colour White, Green, Red or Yellow.
Beam divergence 360 horz. x 12 vert. at 10% peak intensity.
LEDs Service life > 60,000 hours.
Optical system 200 mm dia Polystyrene diffuser lens.
Lantern body High impact polystyrene,sealed to IP65 standard.
Cable entry M16 Cable glands fitted.
Fixing 4 holes for M10 bolts at 200 mm PCD.

PLC-12 Programable LED Controller(Fitted inside each Lantern)

Input Voltage 12V to 24V d.c. Supply
Output Voltage Switch-mode stabilised to suit LED operating current.
Programming Any of the 256 IALA characters can be selected.
Light control Automatic ON / OFF .
Charge controller Solar charge control provided.
Protection Against reverse polarity, over Voltage, and short circuit
Temp. range -20oC to +60oC

 Best Marine LED Beacons -   Solar Power Supply

  • The lantern, solar panels and SMF battery are mounted on a GRP box, except MLB 200-2 all assembled and wired as one “self-contained unit” ready for fitting on top of buoy superstructure.
  • For On-Shore application, Solar Panel shall be fitted on a light pole, facing south except MLB-200-2

TYPE Range (T=.74) LED Load Solar Panel for off shore Solar panel for on shore Battery Autonomy
MLB-200-6 >6.0 n.miles 12V 1.2 Amp 4 Nos. 12V 8W 1 No. 12V 20W 12V 42AH 21 days
MLB-200-10 >100.0 n.miles 12V 2.4 Amp 4 Nos. 12V 10W 1 No. 12V 30W 12V 100AH 21 days